The robust sauna bucket is ideal for successful sauna use. Its creation is a very simple and straightforward process for everyone who wants to fully enjoy the steam room procedure.

Design features

When creating a doused structure, the features of its design must be taken into account. In addition, you can create a variety of types of containers, focusing on personal needs.

  • A modern bucket is a container made of natural wood, classic in shape and size, and it must be reinforced with the obligatory use of brackets. Water is supplied through the pipe. In some cases, the container contains a special insert for guaranteed wood protection.
  • The device is equipped with a special float, with the help of which it is possible to block the stream of water if the container is completely filled with water. However, the jet will flow again when emptying.
  • Taking into account the subsequent work of the bucket for the bath, they must think over the connection diagram.
  • A flexible hose is traditionally used to connect the float valve to the water supply system through a branch pipe. Also, be sure to take into account the connection diagram and fastening reliability.
  • A ball valve is usually installed at the inlet to the device to shut off the water supply. This allows the correct use of the bath water supply.

Understanding what a modern bath bucket is, it can be installed outside to further collect rainwater, because it will be useful and soft for later use. In case of an internal arrangement, it is imperative to use a drain ladder to drain water into the sewer system, but in bath rooms with pouring floors, this option turns out to be impossible.

Pouring device (bucket) for a bath

The principle of the device

Galvanized bucket

What is a bucket? When creating a bucket for pouring, it is important to understand how it will be used in the future and understand the basic principles of its operation. In this case, you need to properly care for the created container. The bucket is a wooden container that can dry quickly. Gaps can be created between its elements, as a result of which liquid sometimes leaks. In any case, the bucket must not be left empty, as this prolongs its life.

Note! If the bath is not frequently visited, it is recommended to fill a large bucket 3 hours before the scheduled procedure. This will help the wood to swell to further fill gaps. However, containers lined with high-quality plastic on the inside do not need to be designed accordingly.

Buckets are different, but their principle of operation is approximately the same.

  • To fill an empty container with water, the ball valve must be opened first. After the maximum possible liquid level is reached, the container is closed by a float switch.
  • The container can be tipped over by pulling a chain or rope. For this, the float is moved downward, as a result of which the container is refilled with water.
  • If it is necessary to protect against emergency situations, you can shut off the water supply using a special tap.

Knowing that a bucket is the main container for use in a steam room, it is important to take into account the peculiarities of its action.

The installation process of the pouring device

Correct installation is imperative.

Principles of installing a dousing bucket

Determining the optimal mounting height

DIY drip irrigation from plastic bottles

Many are interested in how to make a bucket, but initially you need to decide on the optimal height for the location of the container. In the future, the installation process will be simple and fast.

Advice! It is best to install the container at a height of 2.0-2.2 meters, regardless of its volume. Installing the tank outside the building involves determining the height according to a different scheme. The height of the container must also be taken into account, since the exact place of installation of the container depends on this.

Be sure to take into account the features of the supply of pipelines for the supply of water and its subsequent discharge into the sewer system. It is recommended during the design of the premises to decide where the installation is. Water is supplied to the place of the future location of the container and a drain ladder and shut-off valves are created. This is especially important if there is a serious shortage of free space to install the used capacity.

In some cases, it is advisable to create a separate dousing area. The most important thing is to think about how the drain will be created. This is possible with a small bucket size and diameter.

Water supply to the installation site

It is important to understandhow to make a bucket correctly and connect it to the sewage system. You need to understand the correct creation of the sewer system.

Floor drain

Sometimes there is a shower in the bath, and in this case you need to hang a bucket next to it and take care of creating a single sewer ladder. The most important thing is to ensure that the drain hole can successfully handle this volume of water.

Everything is determined by personal wishes and potential usability of the container. The only thing is that it is recommended to create a flooring or a special pedestal of boards, as this will help to carry out water procedures in more pleasant conditions.

Making from wood with your own hand

Garden sprayer manual

How to make a bucket? It is important to understand why the container is called doused and how it will differ from many other containers. In most cases, creating a wooden bucket with your own hands is greatly simplified, since it is assumed that only the basic principles of the upcoming procedure are taken into account.

Initially, the following simple steps are performed:

  • Initially, a bucket is selected. It is advisable to use a container of white or azure color so that the water looks advantageous.
  • Be sure to remove the handles from the bucket used.
  • Create a couple - three tens of polished planks, which should be equal in length to the height of the bucket.
  • Be sure to fix the planks next to the bucket with moisture-resistant glue. A special hermetic glue is used to process the joints.

This is the simplest option for creating a bucket, which can already be used when carrying out bath procedures.

The bucket with the plastic liner will need to be secured to the bracket.

Correct attachment of the dousing bucket

Sometimes you can use the clapboard. However, this procedure will be more technological and will need to take into account numerous nuances. Interested in how to correctly make a bucket of tin or lining with your own hands, you need to understand the specifics of the upcoming process. Be sure to use a template for cutting the bottom and side strips, as this will allow you to correctly determine the size of the parts of the planed board and other details.

All details must be carefully sanded and marked with a pencil or marker. For even cuts, be sure to use an electric plane or jigsaw. When creating a country bucket, each used bar is necessarily processed, and it is further adjusted to the created container, taking into account its liters.

To assemble a container from strips, you need to cut off 2 metal strips for bypassing from the bottom and top. It is recommended to use moisture resistant metal with a thickness of 1-1.5 millimeters. The strips used are necessarily processed with milk and made round.At the two ends, special holes are made for the clips, as they will allow the wooden bucket to be securely fixed.

Then they carry out a phased assembly:

  • The container is assembled from the strips and the bottom part is pre-installed.
  • Tara is held. The lower part is rounded with a metal bracket and pressure is added.
  • Trim the strips, install the upper ring and fasten it.
  • At the next stage, they check the evenness of the geometry of the container, the fastening of the contours.

Important! After installing the wooden container, you need to wait for the moment when the wood swells a little and be sure to block the connecting gaps. The wooden container must be treated with a special varnish for guaranteed protection from external factors.

A correctly created bucket for pouring in a bath will definitely be successfully used for the subsequent steam room procedure.