All gardeners sooner or later face the problem of getting rid of old and dry twigs and twigs. A petrol lopper can be a good helper in such difficult work.

What is a petrol lopper

The word "lopper" itself implies a tool for pruning shrubs and tree branches. Only now these are not simple hand pruners, but productive and efficient gasoline-powered machines, consisting of an engine, a cutting part and a bar (in some modifications).

For example, gasoline trimmers are similar to those used for cutting grass. Their engine is located at the rear, the executive body - the cutter - is made of high-strength alloy. The tool works well with fairly large branches and bushes.

The most powerful tool for pruning knots is the petrol pole pruner, or chainsaw lopper. This is a chain saw with a telescopic handle. In serious models, the cutting head is equipped with a swivel mechanism.

Characteristics, advantages and disadvantages of gasoline loppers

Petrol Lopper

When choosing a petrol lopper, first of all, you should pay attention to the main characteristics of the engine:

  • power (revolutions per minute);
  • type (two-stroke, four-stroke);
  • working volume (m / cube);
  • fuel consumption.

In budget models, the motor is two-stroke. There are four-stroke engines, they are more productive, but much heavier.

The main characteristics of the tool itself include the type of lopper, the volume of the tank, the width and thickness of the cut, the length of the chain pitch and the length of the entire equipment (with a bar).

Cultivator attachment for petrol trimmer

Important! The main advantage of any gasoline technology is its independence. There is no need to lead in power cords, which is very disruptive to work, especially at height. Fuel is consumed in moderation, the volume of the tank is enough for continuous operation for an hour or more.

The productivity of this technique is quite high, it makes it possible to cut knots of different diameters, at any angle. It is well balanced and very ergonomic. The presence of telescopic rods allows you to work with tall trees, and replaceable attachments make it possible to cut twigs and branches in hard-to-reach places.

The main disadvantage of gasoline loppers is their weight. In work, sometimes you have to act with one hand and apply strong pressure on the cut. And the weight of such a tool sometimes reaches 8 kg.

Another disadvantage is the ingress of oil on the crown and leaves. During operation, lubricant is supplied from the oil tank to the chain, which scatters over the tree.

How to choose the right petrol lopper

You can buy a good lopper at any gardening store. The assortment is large enough.

A petrol lopper will be the best choice for someone with a large enough garden. The internal combustion engine will provide good results in a short amount of time.

Snow blower petrol Hyundai

Note! When purchasing a lopper, you need to decide in advance on the volume of future work: if the garden is large enough, it is worth purchasing a more powerful apparatus.

If you have to perform high-altitude work, then you should inquire about the length of the bar and the ability to adjust it.Usually, one-handed lopper chainsaws are bought for work at height, the weight of such tools does not exceed 3.5 kg (without fuel). In general, lighter models will allow you to work for a long time without fatigue.

The main working body is the cutting blade. Its task is to make an even cut without damaging other parts of the wood, so the sharpening should be clear and easy to execute. The oil pump will run longer and more efficiently by providing the necessary lubrication to the cutting end.

Important! Gasoline loppers, due to their excellent performance, are more expensive than models powered by electricity or battery.

Review of the best models of petrol loppers

In the Russian market, several models of well-known manufacturers of garden equipment are especially popular with consumers.

Husqvarna

One of the most popular brands is the device, which was created by the Swedish company Husqvarna. Its gasoline loppers have become very popular among gardeners. They are distinguished by high quality, compactness and convenience.

New developments include the Husqvarna 540XP II. This one-handed petrol lopper saw allows you to work at heights or on a tower. A sufficiently strong engine is environmentally friendly, X-TORQ technology develops increased torque. Fuel consumption in comparison with other similar models is reduced by almost a quarter, and the amount of harmful emissions by almost 70%. The cutting speed reaches 25 m / s, the device is good at cutting branches and twigs up to 30 cm in diameter.

In addition, the lopper is equipped with such systems as:

  • Smart Start - provides a quick start of the tool;
  • AutoTune - sets the required power at any speed;
  • Air Injection - cleaning system, extends service life and service intervals;
  • Low Vib - allows you to significantly dampen vibration.

Chain rebound protection is provided by an inertial brake. It stops the rotation of the cutter instantly.

Gardena Lopper

Note! For ease of use, the set includes 3 grip pads. You can choose the right size for your brush. And a special insert prevents slipping if your hands are wet or you have to work in the rain.

The lids of the fuel and oil tanks are very practical, they are made hinged. There is a built-in fuel level window, which allows you to constantly see the volume of gasoline. Together with an adjustable oil pump and chain tensioning system, this tool will make gardening as comfortable and convenient as possible.

Stihl

The Austrian company Stihl offers on the market a large number of gasoline equipment for garden maintenance. Its products are not inferior in quality to Japanese or Swedish ones, and the functionality of the products of this manufacturer allows you to choose a tool for any work on a personal plot.

The STIHL HT 131 universal lopper is one of the most popular models of the company. A powerful and efficient tool, you can work at heights, trim, trim and shape crowns and hedges.

The versatile decompression system automatically lengthens the valve opening time when starting the engine, this helps to reduce the load on the cable, which in turn allows the machine to run longer.

Lopper STIHL MS 271

The 4-MIX technology, which powers the high-performance STIHL HT 131 vertical pruner motor, has many advantages:

  • the device is practically silent during operation;
  • emissions of harmful substances into the atmosphere are very small;
  • the engine does not need an oil change;
  • significant torque and good traction are generated.

A universal telescopic rod allows working with wood at high heights.

The gasoline lopper "Shtil" is equipped with a manually operated fuel pump. If necessary, the operator can easily pump gasoline to the carburetor by simply pressing a button.

All controls are located on a comfortable handle, which does not create discomfort in work.

The set includes goggles for eye protection, they are made with side protection and are well blown, which will be a good plus in hot weather. A shoulder strap is also included as standard. Long-term work creates a serious load on the spine, the belt very well reduces stress on the body.

Rules for the operation, maintenance and repair of gasoline loppers

When starting the operation of any equipment or apparatus, it is necessary to determine the correct choice. It is important to purchase a model for a specific purpose and nature of work. It must comply with the established nature of the work and the rules for the operation of this equipment.

Trimming of twigs and branches is carried out in the prescribed manner, taking into account the characteristics of the place of work. When working with shrubs and low trees, it is better to use a light tool that will allow you to cut off a branch in the right place without much effort. If the diameter of the branch is large enough, most likely you will have to use a chainsaw-lopper.

Important! It is necessary to use an electric, petrol or other type of delimber only with protective goggles and gloves, wear working overalls that do not interfere with movement.

At the beginning of the working process, it is imperative to check the health of the equipment. Inspect the tool to make sure all parts are securely screwed in. Make some trial runs. Only after that, start working.

Additional Information! To prevent the lopper from jumping off during use and causing injury, you only need to work with it in a stable position.

The saw cutter must be wiped clean after use to remove dirt and dust from all surfaces. If it is not made of stainless steel, be sure to lubricate with oil.

Gasoline loppers for pruning trees are quite reliable devices, using them according to the instructions, you can ensure that they serve for a long time.