Content:
The snow blower on tracks is characterized by high performance indicators and is also fully functional. It is better to choose a gasoline model, since the engine of such a machine has more power, providing high traction and efficient operation in all conditions. Among other things, the developers have come up with a functional equipment to clear the area from snow. Such equipment is simply hung on the machine. Most often, a tracked model is used, which is bought for a summer residence.
Features of snow plow tracked vehicles
With light precipitation in winter, it is not difficult to remove snow near the entrance. In the event of a serious snowfall for the owners of summer cottages and country houses, this can become a real problem. For such a task, they prefer to buy a snowplow in order to quickly remove the snow, rather than spend half a day in the yard with a shovel in hand.
Snow blower on tracks
There are a variety of models and equipment available. You can buy a snow machine for every taste. It includes the following mechanisms:
- motor or power component;
- auger or rotating shaft;
- casings and hulls that throw snow on one side or the other of the machine;
- impellers, which look like blades made like spirals.
The tracked snow plow works in a simple way. The impeller rises the snow, from where it enters the casing to collect the mass, there it is crushed. Then the snow is thrown out with a pipe directed in a certain direction to the ground.
Before choosing equipment, it is first important to determine which design is suitable. There are single-stage and two-stage machines.
In the first case, a technique is used to clear small areas covered with both wet and fluffy snow, but without the icing phase. This design has no drive. If a person is in good physical shape, then such a car will suit him, since the main feature of the technique is its movement at the expense of the owner. On the other hand, the single stage design has good maneuverability and low weight.
As for the two-stage type, the power reserve is high here. The machine is self-propelled. It moves by means of tracks or wheels. Even if the snow has already frozen over, there will be no problems with its cleaning. The principle of operation is that the bucket rakes in the snow, and the rotor and auger throw it out to a distance of 15 m.
Snow blower on tracks
Difference between tracked and wheeled snow blower
The main difference between tracked and wheeled snow blowers is that the center of gravity of the built-in system changes depending on the load on the machine. The tracked snow blower has wide, profiled tracks, which gives it more stability during the working period.
For example, when a tracked unit falls into a snowdrift, the center of gravity shifts to another track, so the machine can easily move even in deep snow. In particular, the snow blower works easily on slopes, especially steep ones, as its track support easily climbs hills and descends into holes.
Machinery on tracks easily cope with both freshly fallen snow and packed snow.
If the device was assembled at the factory, then the manufacturer often includes the possibility of redistributing power between the drive and the auger. This way less fuel is consumed, and the car is more resistant to overturning. As for homemade products, they are more often driven by a drive, moreover, they are made on wheels, which complicates movement in deep snow. Therefore, it is worth paying attention to the store tracked model.
Tracked snow blower is the best choice
Since work is carried out in winter during the cold season, a decompression valve is used to facilitate starting the engine. Then the engine runs stably even when there is severe frost. The oil channels are enlarged to provide better engine lubrication.
Pros of a tracked snow blower
For a tracked self-propelled snow blower, the following positive points are inherent in contrast to the wheeled model, as well as types with an electric motor:
- stable position in the snow, even on steep slopes;
- the thrust is high, so it can work with large masses of precipitation;
- the efficiency is also high due to the connection to the work of not only the engine, but also the auger;
- there is an opportunity to work in deep snowdrifts.
All this is possible thanks to the wide tracks, so the car clings to the snow better than the wheeled model. This means that the snow blower will not slip and slide, even if it is necessary to lift icy stale snow, which cannot be said about the wheeled model.
Cons of tracked snow blowers
The main disadvantages of the model in comparison with the wheel:
- movement speed is low;
- maneuverability is also lower when compared with the wheeled type;
- the weight of such a machine is much greater;
- a tracked model costs more than a wheeled model.
Another significant drawback is that gasoline is only enough for 2 hours, after which, if the work is not finished, the car must be turned off, wait until it cools down, then refuel and only then continue working. When the plot in the country is small, then such a feature is not a minus, but if the front of the work is large, then the efficiency will be low.
Before choosing a petrol, electric, wheeled or tracked snow blower, you need to weigh the pros and cons. But there will definitely not be a mistake in one thing - the owner of the summer cottage will get rid of the need to remove the snow manually.
Considerations when choosing a tracked snow blower
When choosing a tracked vehicle, you should immediately pay attention to the fact that it is better than a wheeled model, because it is not afraid of any barriers. It easily passes over any snowdrift and does not slip on ice. In addition, in addition to the engine, the auger is still running, which ensures fast cross-country ability and high efficiency.
The impeller collects crushed snow and sends it to the chimney for discharge
The principle of operation is the same for different models with tracks. The crusher breaks the ice crust, then the impeller collects the crushed snow and sends it to the chimney for discharge.
The machine is controlled by a mechanical system and electronic resources. A person simply controls the operation of a gasoline unit to the nearest centimeter.
When choosing equipment, you need to take into account what the power indicator is. Usually it reaches 10 liters. with., although more expensive models have better performance.
Bucket parameters are of no small importance. They are fundamentally individual for each species. You need to select them for the parameters of your site.
For example, if the cleaner has 11 liters. with., then it will not necessarily have a large bucket, rather, on the contrary, it will be compact, which will give the machine more efficiency and increase the speed of snow removal in difficult dead-end areas.
The difference is also in the speed of movement. Usually it is six steps, and two gears for reverse. It is also important to pay attention to such an indicator as the emission of snow. The power of the cleaner depends on how long this distance is. The flight range can be up to 15 m.
With this in mind, it is worth calculating all the costs, deciding whether these additional functions will be needed on a particular site. For example, some developers exclude the possibility of speed fixing. This improves performance. The manufacturer can also add an amplifier that facilitates maneuverability.
Among other things, an adjustable skid plate is added that undercuts the snow drift for ease of operation and increased productivity. Improved shroud, redesigned heating, hydraulic isolation all add to performance.
Thus, when choosing between different models, it is better to opt for that cleaner who will meet all the parameters of the area that he has to clean. Only after weighing all the pros and cons, you can make a purchase, and then the summer resident will never have problems with snow again!
